SP 7.5HP
| MPPT controller for maximum power transfer from solar panel |
| Cost effective due to higher motor efficiency |
| Motor Type: 4Pole BLDC Motor, Fully SS, IP68 |
| Enclosure Type: IP54 |
| Protection: Dry Run,Low Radiation,Reverse Polarity,Over flow Tank Overload, Short Circuit |
PRONTO RENEWABLES ENERGY PVT LTD | ||
| PRONTO SOLAR WATER PUMP - SPECIFICATIONS | ||
| PUMP CAPACITY (HP) | 7.5HP | |
| SOLAR BLDC PUMP CONTROLLER | ||
| 1 | Motor HP | 7.5HP |
| 2 | Solar Panel Configuration | 325W × 24Nos.(12/122 String) |
| 3 | Input Voltage | 450 ~550V dc |
| 4 | MPPT Voltage Range | 340 ~420V |
| 5 | Output Voltage | 0-320V, EC PWM 3Ph |
| 6 | Output Frequency | 0 ~120Hz (Varies as per Solar radiation) or 0 ~3600 RPM |
| 7 | Grid + Solar Input | No, Only Solar output |
| 8 | LED Display | Yes |
| 9 | RMS | Optional (With RMS Card Customer can ON-OFF Pump by SMS Also) |
| 10 | Environment Temp. Range | -10°C to 55°C |
| 11 | Humidity | 5 to 95% |
| 12 | Enclosure Type | IP54 |
| 13 | Protection | Dry Run, Low Radiation, Reverse Polarity, Over flow Tank Overload, Short Circuit |
| The specifications & Design are subject to change due to continuous improvements. | ||
Contact Form
Looking for help or have a general inquiry?
