SP 1HP
Our USP:
| MPPT controller for maximum power transfer from solar panel |
| Cost effective due to higher motor efficiency |
| Motor Type: 4Pole BLDC Motor, Fully SS, IP68 |
| Enclosure Type: IP54 |
| Protection: Dry Run,Low Radiation,Reverse Polarity,Over flow Tank Overload, Short Circuit |
PRONTO RENEWABLES ENERGY PVT LTD | |||
| PRONTO SOLAR WATER PUMP - SPECIFICATIONS | |||
| PUMP CAPACITY (HP) | 1HP | ||
| A | SOLAR BLDC PUMP SET | 1HP | |
| 1 | Voltage | 72V dc,EC,PWM | |
| 2 | Current | 8A | |
| 3 | Type | 4Pole BLDC Motor, Fully SS, IP68 | |
| 4 | Size | V4-Water Filled | |
| 5 | Head in Mtr | 30/50/70/90 | |
| 6 | Discharge in LPM | 45/33/24/18 | |
| 7 | Delivery | 1.5"/1.25"/1.25" | |
| B | SOLAR BLDC PUMP CONTROLLER | ||
| 1 | Motor HP | 1HP | |
| 2 | Solar Panel Configuration | 325W × 3Nos. All in series | |
| 3 | Input Voltage | 120 ~150V dc | |
| 4 | MPPT Voltage Range | 80 ~110V | |
| 5 | Output Voltage | 0-72V, EC PWM 3Ph | |
| 6 | Output Frequency | 0 ~120Hz (Varies as per Solar radiation) or 0 ~3600 RPM | |
| 7 | Grid + Solar Input | No, Only Solar output | |
| 8 | LED Display | Yes | |
| 9 | RMS | Optional (With RMS Card Customer can ON-OFF Pump by SMS Also) | |
| 10 | Environment Temp. Range | -10°C to 55°C | |
| 11 | Humidity | 5 to 95% | |
| 12 | Enclosure Type | IP54 | |
| 13 | Protection | Dry Run,Low Radiation,Reverse Polarity,Over flow Tank Overload, Short Circuit | |
| The specifications & Design are subject to change due to continuous improvements. | |||
